| Video Inputs |
| Composite Video |
3x via BNC Connector |
| S-Video (Y/C) |
3x via 4-PIN Mini-DIN Connector |
| DVI-I (note 1) |
3x via DVI Connector |
| SDI (SD or HD-SDI) |
8x via BNC (C2-7260 only)
(2x on C2-7210 and C2-7200) |
| Genlock Input |
| Reference Signal |
Any of the Video Inputs |
| Independent Output 1 |
| Composite Video |
1x via BNC Connector |
| S-Video (Y/C) |
1x via 4-PIN Mini-DIN Connector |
| DVI-I (Note 1) |
1x via DVI Connector |
| SDI (SD or HD-SDI) |
1x via BNC |
| Independent Output 2 |
| Composite Video |
1x via BNC Connector |
| S-Video (Y/C) |
1x via 4-PIN Mini-DIN Connector |
| DVI-I (Note 1) |
1x via DVI Connector |
| SDI (SD or HD-SDI) |
1x via BNC |
| Input/Output Range |
| Computer Resolutions |
Up to 2048x2048
DVI: Up to 1280x1024 |
| Max Vert Refresh Rate |
250Hz |
| Max Horiz Frequency |
150KHz |
| HDTV Resolutions |
All thru 1080p |
| Interlace Support |
Progressive and Interlaced |
| Television Standards |
NTSC 3.58, 4.43, PAL-B, G, I, D, H, PAL-M, PAL-N & SECAM (In Only) |
| SDI |
SD-SDI or HD-SDI |
| Input RGB Sync |
| Type |
Auto-detect RGBHV, RGBS, RGsB |
| Level/Impedance |
TTL, 10KΩ |
| Polarity |
Positive or Negative |
| Maximum Level |
5Vp-p |
| Output RGB Sync |
| Type |
RGBHV, RGBS |
| Level/Impedance |
5Vp-p, 220Ω |
| Polarity |
Positive or Negative |
| Audio Switching (Optional A2-2000) |
| Stereo Inputs |
10x Balanced and Unbalanced |
| Program Output |
1x Balanced and Unbalanced |
| Preview Output |
1x Balanced and Unbalanced |
| Connectors per I/O |
2x RCA (Phono) for Unbalanced
1x Terminal Block for Bal & Unbal |
| Control Methods |
| Local Front Panel |
10x2 Programmable Buttons+LED, Rotary Selector and LCD |
| RS-232 Interface |
DB-9 Male Connector |
| IP Interface |
RJ45 Connector |
| Audio Switcher Control |
Via D-15 Options Connector from the Main Unit |
| Mechanical |
| Desktop Case (HWD) |
1.75x17x7.9" (44x420x200mm) |
| With Rack Ears (HWD) |
1.75x19x7.9" (44x482x200mm) |
| Weight(Net) |
8.4 lbs (3.8 kg) |
| Environmental |
| Operating Temperature |
+40° to +113° F (4° to +45° C) |
| Operating Humidity |
10% to 85%, Non-condensing |
| Storage Temperature |
32° to +140° F (0° to 60° C) |
| Storage Humidity |
10% to 85%, Non-condensing |
| Warranty |
| Limited Warranty |
2 Years Parts and Labor |
|
| General |
| Image Size & Position |
AutoSet or Manual |
| Image Zoom Range |
Continuous to 1000% |
| Image Shrink Range |
Continuous to 10% |
| Image Mirroring |
Horizontal and/or Vertical |
| Image Freeze |
Full Frame |
| Video Sampling Rate |
108MHz |
| Resolution Memory |
Approximately 1,000 Definable |
| Firmware Memory |
Flash, Upgradable via RS-232 |
| Flicker Filter |
4-Level Vertical |
| Picture-in-Picture |
2 Windows + Background from any 3 Video Inputs |
| Number PIP Windows |
2 in Dual PIP Mode
1 in Switcher & Ind. Modes |
| Video I/O Impedance |
75Ω |
| Video Decoder |
9-bit Digital |
| Comb Filter Decoding |
Adaptive |
| De-Interlacing (Pal-NTSC) |
Pixel-level Motion Adaptive |
| Film Mode (NTSC) |
3:2 Pull Down Detection |
| Video Encoder |
10 Bit Digital |
| Digital Sampling |
24-bit, 8-bits per R, G, and B |
| Colors |
16.7 Million |
| SDI Jitter |
SMTPE 259M-C(270Mbps; 525/625 line)
jitter 0.070 +/- 0.01 UI
SMPTE 292M (1.485/1.4835Gbps: 720p,
1035i, 1080i, 1080p)
jitter 0.176 +/- 0.02 UI |
| Video Scaling Engine |
Proprietary CORIO2® |
| Internal Format |
4:4:4 YUV |
| Internal Test Patterns |
User Defined |
| LCD Panel |
24x2 Character |
| Logo Inserter |
Flash Programmable |
| Proc Amp Adjustments |
Brightness, Contrast, Saturation,
& Hue for CV & SV Inputs, plus
Video Level for RGB Inuts |
| Proc Amp Memory |
Settings for each Video Input |
| Power Requirement |
| Internal Power Supply |
100-240VAC, 47-63Hz, 50W |
| Regulatory Approvals |
| Video Scaler Unit |
FCC, CE |
| Power Supplies |
UL, CE, CSA |
| Accessories Included |
| 1x C-Video I/O Cable |
6’ (2m) BNC to BNC |
| 1x S-Video I/O Cable |
6’ (2m) 4-Pin S-V to 4-Pin S-V |
| 1x DVI I/O Cable |
6’ (2m) DVI-I to DVI-I |
| 5x RGBHV I/O Adapters |
DVI to HD-15 Adapters |
| 1x AC Power Cord |
6’ (2m) USA, UK or Euro Type |
| 1x RS-232 Cable |
6’ (2m) D9F to DB9F |
| 1x Operations Manual |
|
| 1x Rackmount Kit |
2 Ears and 4 Screws |
| 1x Control Software |
Downloadable from website |
| Optional Accessories |
| A2-2000 |
Audio Switcher (Note 2) |
| CC-300 |
Hardware Control Panel |
| Product Item Numbers |
| C2-7260 |
Version with 8 HD-SDI Inputs |
| C2-7210 |
Version with 2 HD-SDI Inputs |
| C2-7200 |
Programmable Front Panel Version |
| Notes |
| (1) DVI-I Input/Output connectors also accommodate
RGBHV, RGBS, RGsB, YCbCr & YPbPr signal formats. |
| (2) A2-2000 is controlled from the C2-7100 or C2-7200 and
provides Audio Follow Video or Audio Breakaway. |
|
- Especificaciones para C2-7200 & C2-7300